How to fix the problem of not finding Wi-Fi in Windows 10?

Internet is very important in our life and not finding Wi-Fi in the laptop causes a lot of trouble. In this article, we teach how to fix the problem of not finding Wi-Fi in Windows 10.

While we can do some of our work offline with the computer, we cannot ignore the importance of the Internet. We can almost say that we all depend on the Internet and need Wi-Fi to do our work, especially in this period when most people are out of work due to the spread of virus. Corona have worked remotely and do their work online.

One of the biggest and most common problems that most users face in Windows 10 is not recognizing the Wi-Fi network. In this article, we have prepared ways to fix the problem of not finding Wi-Fi in Windows 10, so stay tuned with Digiato.

reset TCP/IP

First step: Search for Command Prompt (Command Prompt) or CMD on your computer and open it with admin access.

Second step:Enter the following command in CMD: netsh int ip reset

Step 3:Close the CMD window and follow the next steps to fix network adapter problems.

Two other commands that can help your computer detect a Wi-Fi network and connect to it are as follows:

• ipconfig /release and ipconfig /renew

Enter the above two commands one by one. These commands will release your current DHCP-assigned IP address and assign you a new one. If you encounter the error “Wi-Fi does not have a valid IP configuration”, enter the following commands one by one:

• netsh winsock reset
• ipconfig /release
• netsh int ip reset
• ipconfig /renew
• ipconfig /flushdns

Network and Internet troubleshooting

Step 1:Press Windows + I to open Settings and look for the following two items:

• Identifying and fixing network problems
• Identifying and fixing network adapter problems

Second step:The steps are the same for both of the above and that’s why we teach only one of them. Select one of the troubleshooting options and click on the “Next” button by selecting the “Apply repairs automatically” option.

Step 3:Follow the on-screen instructions, and of course continue these steps for other troubleshooting options if the problem still persists.

With the release of the Creators Update, Microsoft has provided another troubleshooting option for users, which is not available through search, and you must follow the steps below to access it.

First step: Go to Settings > Update & Security > Troubleshoot > Internet Connections.

Step 2: Click on the “Run the troubleshooter” option to start the process and then follow the instructions.

Change network name/SSID and password

The next action that can solve the problem of not finding Wi-Fi in Windows 10 requires a cable to connect the laptop to the modem. Connect the modem to your device with a cable and enter the IP address of the router (such as 198.168.1.1) in your browser. Sign in and change your login details. For more information, you can refer to your router’s manual.

Remove Wi-Fi network

First step: For one of the simple ways to fix the problem of not finding Wi-Fi in Windows 10, you should go to Settings > Network & Internet > Wi-Fi and click on the “Manage known networks” option. Do it.

Second step:Click on your Wi-Fi network name and select “Forget” option.

After doing this, you will need to enter the password to reconnect to the network, so make sure you remember it or write it down somewhere.

DHCP troubleshooting

DHCP, or Dynamic Host Configuration Agreement, is the process Windows uses to configure and assign an IP address to a compatible wireless device, which includes your computer, so we need to check if it’s enabled.

Step 1: Search for “View Network Connections” and open it.

Step 2:Click on the network adapter you are using and select the “Diagnose” option.

If this service is disabled, this should enable it again.

Step 3:If the above step doesn’t fix the problem, you can try setting your IP address manually. This time, by right-clicking on the adapter, instead of the Diagnose option, select the “Properties” option.

Fourth step:In this section, you must first click on the “Internet Protocol Version 4 (TCP/IPv4)” option and then select Properties.

Step 5: Select the option “Use the following IP Address” and then enter the numbers. It’s not a bad idea to try Google Public DNS, but talking to your ISP isn’t a bad idea either.

Save all settings and see if your computer can detect the Wi-Fi network. If you don’t get an answer this way, you can return all the settings to the default state.

Disable firewall/antivirus

It is possible that the firewall caused Wi-Fi not to be found in Windows 10, and disabling it will solve the problem.

Step 1:Open the Control Panel and open it by searching for “Windows Defender Firewall”.

Second step:Click on the option “Turn Windows Defender Firewall on or off” in the sidebar to activate and deactivate the firewall.

The third step:It is possible for you to disable the firewall, of course, turn it off temporarily, that is, until the problem is solved.

If your firewall is turned off due to using an antivirus, disable your antivirus. It is possible that you need to reboot your laptop once to disable it.

Update network drivers

First step: For this solution of not finding Wi-Fi in Windows 10, open the Device Manager (Device Manager) from the start menu, of course, it is possible to run it from the hidden menu by pressing the Windows + buttons X also appears.

Second step:Double-click on network adapters option and right-click on your network adapter, select update driver option.

Channel width

A number of users have mentioned that by changing the channel width to auto, they fixed the problem of not finding Wi-Fi in Windows 10, so it doesn’t hurt to try this, and you can change it later.

>

Step 1: Open Network Connections again from the Start menu and right-click on the network name. Select the Properties option as before, but this time click on “Configure”.

Step 2:You should set the channel width to auto but sometimes there is no such option so you should try several other options. Note the default settings before making any changes.

It’s likely that there are many routers around you that use the same channel width, so changing the channel might help, but also take a look at the following:

• 802.11a/ac uses the 5 GHz band.
• 802.11b/g uses the 2.4 GHz band.
• 802.11n uses the 2.0 GHz band. It uses 4 and 5 GHz.

Power management

The network adapter needs power to work, and it is possible to disable the power management settings of Windows 10 to save power.

Step 1:Open Device Manager from the Start menu and right-click on your network adapter, select Properties. This time, go to the Power Management tab.

Second step: Uncheck the option “Allow the computer to turn off this device to save power” so that Windows cannot disable the network adapter. Reboot your system and check this section again.

Delete wireless profile

An error or bug can be responsible for the failure of the wireless profile.

First step:Open CMD from the start menu and enter the following command with admin access:

• netsh wlan delete profile name=WirelessProfileName

Step 2:In the command above, instead of “WirelessProfileName”, enter the name of your network and press the Enter button. After this, your device will reconnect to the network and Windows will automatically create a new profile.

Enable SSID Broadcast

The router broadcasts the SSID or network name to nearby devices, so you can connect your laptop or smartphone to the network.

First step:Open a new tab in your browser and then enter the IP address of your router, which is usually 198.168.1.1, of course, the IP address of your router may be different and You need to check its manual.

Step 2:Usually, there is an option to enable SSID Broadcast in the wireless settings section. After saving the settings, you can reboot your computer.

Enable WLAN AutoConfig service

First step: Search and open the “Services” app.

Second step:Find the “WLAN AutoConfig” option in the list and right-click on it, and select the Properties option.

Step 3:Make sure the startup type is set to automatic. Save the settings and reboot your system.

Step Four: You will see a list of other services that are specified. Make sure the options are as follows in your system:

• Network Location Awareness should be on the automatic mode.
• Network List Service to manual mode.
• Windows Event Log on Auto Mode.
• Windows Update Set the manual option.

Enable Network Discovery

Step One: For the last solution to find WiFi in Windows 7, go: Control Panel> Network and Internet> Network and Sharing Center