Android users have the option of installing custom or factory ROMs on their devices; But the way to do this is different in the products of different brands. In the following article, we will learn how to flash Samsung phones with a computer, which is possible with various software, including Odin and DroidKit.
ALearning to flash Samsung phones with a computer
You can change the firmware and appearance of your device or restore it to its original state by learning how to flash a Samsung phone with a computer. Of course, you should note that flashing Samsung devices is a bit more difficult compared to other Android phones. Also, before starting work, it is better to pay attention to the things mentioned below.
Checking the battery level of the phone or tablet is one of the important points that you should pay attention to. It is recommended to fully charge the battery of the device before continuing the tutorial on how to flash a Samsung phone with a computer. During this process, the device turns on and off several times, which can consume a lot of battery power. If the device turns off during this process, there is a high chance that you will not be able to install the ROM on it again.
Installing the Samsung USB driver is another essential prerequisite for learning how to flash a Samsung phone with a computer. If you don’t have these drivers on your computer, you will encounter problems in the initial stages of device recognition by the software. You can visit Samsung official website to get the drivers. To check the installation of Samsung drivers, you can go to the Windows Control Panel and then go to the Programs and Features section.
Preparing a backup copy of essential information placed on the internal memory of the device is very important; Because during the flashing process, all the data on it will be deleted. Also, if you are interested, you can use dedicated programs such as Titanium Backup, which were developed for this purpose and offer more features such as making backup copies of programs.
Root access is necessary to flash Samsung devices. For this purpose, you can use different programs like Magisk. How to use this program to root Samsung phones in the article “How to root Android devices” Shall we?” is fully explained.
Rom file suitable for the device is the most important prerequisite for flashing any Android device. You can get the original ROM related to your mobile or tablet by searching the internet. You can also get custom ROMs by visiting unofficial sites like the XDA forum. Note that most custom ROMs come with bugs; So it is better to make sure of their correct operation before using such ROMs.
1. Flashing Samsung mobiles with Odin program
Several software for flashing Samsung phone with computer are available to users for free. The Odin program is one of these titles that is more popular among its competitors. This program has been able to show acceptable performance and is suitable for flashing almost all Samsung Android devices.
To get started, you can visit one of the websites samsungodin.com or odindownload.com to get the latest version.
The download file will be in compressed format (Zip). Extract it first.
After extracting the downloaded file, you should have files similar to the image below.
Right-click on the Odin.exe file and select Run as administrator from the opened menu.
Now you need to put your device in download mode so that it is detected by Odin software. To do this, first turn off the device normally and then connect it to the computer with a cable.
Now hold the volume down, home and power keys at the same time for a few seconds. When the device vibrates, release the power key, but still hold the other two keys until you enter download mode. On newer Samsung devices, you must first hold down the Volume Down, Bixby, and Power keys.
After a screen with a yellow warning triangle in the middle appears, press the Volume Up key to enter download mode.
Now, a message titled Added will be displayed in the Log box of the Odin software, which indicates that the device is correctly identified by the program. Also, the code associated with the device should be displayed at the bottom of the ID:COM title.
If the Odin software could not detect your phone or tablet correctly, close it once and run the program again in Administrator mode.
If the downloaded ROM file is compressed, extract it first. Among the extracted items, there should be a tar.md5 format file.
In the Odin software, click on the AP key and after going to the storage path of the tar.md5 file of the desired ROM, click on the Open key to select it.
Some ROMs have additional files including bootloader (BL), modem files (CP) and shortcodes (CSC). If such files are present in the extracted ones from the ROM zip file, select them as well. Note that these files change the main parts of the device; So, more than choosing them, make sure that they are compatible with your device.
After selecting the required file(s), click on the Start option to begin the process of flashing the Samsung phone with the computer.
Due to the size of the selected files, Odin may freeze at first. In this case, do not close the program until it returns to normal.
The process of flashing Samsung devices usually takes between 5 and 10 minutes depending on the size of the files. After completing this process, a message titled Pass will be displayed in green on top of the Odin software.
Now you can disconnect the USB cable from your phone or tablet.
It is possible that after going through the above steps, your phone or tablet will remain in the boot menu. To solve this problem, you need to enable Stock Recovery mode. For this purpose, press the Volume Up, Home (or Bixby) and Power keys at the same time.
After the device vibrates once, release the power key; But keep holding the Volume Up and Home (or Bixby) keys until you enter the recovery menu.
In the recovery menu, select the Wipe Data / factory reset option and then click the Reset Phone Now option.
Now the device will restart once more and now boot properly.
2. Flashing Samsung mobiles with DroidKit
DroidKit software is another popular program that we discuss in the tutorial on how to flash a Samsung phone with a computer. This app is usually used to install factory ROMs. Fortunately, in addition to the Windows version, the mentioned title also uses a Mac OS version, and you can use it to flash your Samsung phone or tablet with Apple computers. Note that this program is paid; But you can also get its cracked version by searching internal sites.
To get started, download DroidKit from the developer’s official website at iMobie.com or go for its cracked version on internal sites.
Run the installation file of the program and after the installation is finished, run it.
Click on the Reinstall / Upgrade OS option on the main page of the DroidKit software.
Connect your Samsung phone or tablet to the computer with a USB cable.
After connecting the device to the computer, click the Start button on the Reinstall / Upgrade OS page.
If the device is correctly detected by the software, you should see its name inside the program screen.
If the device is identified correctly, click the Next button below its name.
DroidKit software is able to display a list of official ROMs released for the connected device.
Find your desired ROM among the items displayed, and then click on the Download option at the bottom of the Operation title.
Wait until the process of downloading the ROM file is finished. This part will usually take some time.
After finishing the process of downloading the ROM file, click on the green Star to Upgrade button at the bottom of the page.
Now you need to put your device in download mode to be recognized by DroidKit software. To do this, first disconnect the device from the computer and then turn it off by holding the power key.
Now hold the volume down, home and power keys at the same time for a few seconds. When the device vibrates, release the power key, but still hold the other two keys until you enter download mode. On newer Samsung devices, you must first hold down the Volume Down, Bixby, and Power keys. Then connect the device to the computer again via USB cable.
After a screen with a yellow warning triangle in the middle appears, press the Volume Up key to enter download mode.
After moving to the download mode on your phone or tablet, click the Next button on the DroidKit app.
Finally, you just have to wait until the process of installing the new ROM is finished.
What is the best program to flash Samsung phones?
Odin program is one of the most popular tools to install ROM and bootloader on Samsung devices have acceptable performance.
Will there be any problem installing ROM on Samsung phones and tablets?
If you use the ROM suitable for your device and the installation path Go right, you won’t face any problem; Otherwise, there is a possibility of permanent damage to the device.
Is root access necessary to install custom ROM on Samsung phones?
Yes; If you are going to install custom ROMs on your device, you must have already rooted it.
How long does the process of flashing Samsung phones and tablets take?
Time required To install ROM, it varies according to the device and the size of the files; But it usually takes between 5 and 10 minutes.
